White-outdoor Yard Boss 950 User Manual download pdf (Page 10)

SECTION 5: ADJUSTING YOUR CHIPPER SHREDDER VACUUM

WARNING: Do not at any time make any

adjustments without first stopping engine,

disconnecting spark plug wire, and

grounding it against the engine.

Height Adjustment

The height adjustment knob is located on the lower

right hand side of the chipper shredder vacuum. Turn

the knob clockwise to raise the nozzle and turn the

knob counterclockwise to lower the nozzle. The best

height for the nozzle will vary according to the

conditions. Adjust the height of the nozzle to find the

setting which gives the best performance for operating

conditions. In general, raise the nozzle to vacuum a

thick layer of leaves and lower the nozzle for smooth

surfaces. See Figure 10.

Figure 10

Clutch Cable Adjustment

To adjust the clutch cable, refer to the Clutch Cable

Adjustment in the ASSEMBLY section.

Shift Rod Adjustment

If the shift rod needs adjustment proceed as follows:

• Remove the bag from the unit.

• Remove the hairpin clip and flat washer from the

upper end of the shift rod. Pull the ferrule out of the

hole in the shift lever, making certain the wave

washer remains in place on the ferrule.)

See Figure 11.

• Place the shift lever in 6th position (all the way to

the left).

• Push down on the shift rod and thread the ferrule

up or down the shift rod until the ferrule lines up with

the upper hole in the shift lever.

• Secure ferrule to the shift lever with flat washer and

hairpin clip.

Figure 11

SECTION 6: MAINTAINING YOUR CHIPPER SHREDDER VACUUM

WARNING: Before performing any mainte-

nance or repairs, stop the engine, wait

until the machine comes to a complete

stop, disconnect the spark plug wire and

ground against the engine to prevent unin-

tended starting.

Lubrication

Wheels: Lubricate the rear wheels with light oil once a

season. See Figure 12.

Nozzle Height Pivot Bracket: Lubricate the pivot

points of the nozzle height pivot bracket once a season

with light oil. See Figure 12.

Shift Lever: Lubricate the pivot points on the shift lever

once a season with light oil. See Figure 12.

Figure 12

Height

Adjustment

Knob

Ferrule

Shift Lever

Hairpin Clip &

Flat Washer

Shift

Rod

Lubricate

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 23 24

Comments to this Manuals

No comments

White-outdoor Yard Boss 950 User Manual Page 10

Comments to this Manuals

Related products and manuals for Gardening equipment White-outdoor Yard Boss 950