White Outdoor LT-1850 Operator's Manual download pdf (Page 10)

100

Features& Controls,

_J Headlights

The light switch turns the tractor headlights on and off.

_PTO Switch

The PTO (Power Take-Off) switch engages and disen-

gages attachments that use the PTO. To engage the

PTO, pull UP on the switch. Push DOWN to disengage.

Note that the operator must be seated firmly in the trac-

tor seat for the PTO to function.

_"_ Ignition Switch

The ignition switch starts and stops the engine, it has

three positions:

B OFF Stops the engine and shuts off the

electrical system.

O RUN

Allows the engine to run and powers the

electrical system.

W START Cranks the engine for starting.

NOTE: Never leave the ignition switch in the RUN posi-

tion with the engine stopped-this drains the battery.

D Brake Pedal

Depressing the brake pedal applies the tractor brake.

Ground Speed Pedals

The tractor's forward ground speed is controlled by the

forward ground speed control pedal. The tractor's

reverse ground speed is controlled by the reverse

ground speed control pedal.

Depressing either pedal will increase ground speed.

Note that the further down the pedal is depressed, the

faster the tractor will travel.

_ Parking Brake

The parking brake knob is used to lock the parking brake

when the tractor is stopped. Fully depressing the brake

pedal and pulling up on the knob engages the parking

brake. Refer to page 10 for a full explanation of parking

brake functions.

Mower Height of Cut Adjustment

38", 44", 50", & 54" MOWER DECKS

The cutting height adjustment knob controls the mower

cutting height. The cutting height is infinitely adjustable

between 1" and 3-5/8."

40" MOWER DECKS

The cutting height adjustment lever controls the mower

cutting height. Push down on the button to release the

lever, move to the desired cutting height, and release the

button to lock. The cutting height is infinitely adjustable

between 1" and 3-5/8."

Cutting Height Fine Tuning Adjustment

(40" Mower Decks Only)

The cutting height fine tuning adjustment is used to set

the mower cutting height between two of the preset cut-

ting positions.

H D Cruise Control

The cruise control is used to lock the ground speed con-

trol in forward. Move the lever forward until the desired

ground speed is reached. To disengage the cruise con-

trol move the lever back. In the event you need to stop

quickly, depressing the brake pedal will also return the

cruise control to neutral.

_Seat Adjustment Lever

The seat can be adjusted forward and back. Move the

lever, position the seat as desired, and release the lever

to lock the seat into position.

Transmission Release Valve Lever

The transmission release valve lever deactivates the

transmission so that the tractor can be pushed by hand.

See PUSHING THE TRACTOR BY HAND for opera-

tional information.

Transmission Oil Expansion Chamber

(K71 Models Only)

Transmission oil is added through the transmission oil

expansion chamber. It also serves as extra holding

capacity for oil as the transmission heats up and the oil

expands. See TRANSMISSION MAINTENANCE for oil

level check and fill procedures.

r_ Fuel Tank

To remove the cap, turn counterclockwise. On models

with a dashboard display, the fuel gauge is part of the

dashboard. Models without a dashboard display have a

fuel gauge located under the seat.

Differential Lock Pedal (Select Models)

Depressing this pedal locks the transmission differential,

locking both rear wheels into "drive".

Use this feature if the tractor is stuck because one wheel

is slipping. Engage the differential lock at slow

9 ground speeds only.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 99 100

Comments to this Manuals

No comments

White Outdoor LT-1850 Operator's Manual Page 10

Comments to this Manuals

Related products and manuals for Lawnmowers White Outdoor LT-1850