White Outdoor LT-1850 Operator's Manual download pdf (Page 18)

OperatingtheTractor

Installing the Mower Deck

1. Park tractor, shut off PTO and engine, remove the

key and apply parking brake. Turn the wheels fully to

the left.

Place mower height adjuster (B, Figures 7 & 8) in the

lowest cutting position. Place the mower lift lever in

the lowest position, also. Slide mower deck under

right side of tractor so that mower hitch is aligned

with the front tractor hitch.

See Figure 11. Turn wheels straight. Pull back on

the spring-loaded lever (B) while lifting up on the

mower hitch. Install mower hitch onto tractor hitch

brackets (A). When properly installed, the spring-

loaded lever should seat fully underneath the brack-

ets.

4. See Figure 9. Connect the mower lift arm (A) to the

tractor lift arm (B) using the flat washer (C) and safety

clip (D).

5. See Figure 10. Move idler arm (A) to relieve belt ten-

sion. Install belt onto the PTO pulley (B).

Figure 11. Mower Hitch

A. Tractor Hitch Brackets

B. Spring-Loaded Lever

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 99 100

No comments

White Outdoor LT-1850 Operator's Manual Page 18