White Outdoor LT-1850 Operator's Manual download pdf (Page 16)

OperatingtheTractor

ADJUSTING MOWER CUTTING

HEIGHT- 40" MOWER DECKS

The cutting height adjustment lever (A, Figure 6) controls

the mower cutting height and has five positions. The

highest cutting position should be used when transport-

ing to and from the work site (do not cut with the lever in

the highest position). The lower four positions are used

when mowing.

Set this lever so that the deck is cutting off 1/3 the height

of the grass or less.

If the desired cutting height falls between two notches,

use the cutting height fine tuning adjuster (B) to achieve

the correct height.

Figure 6. Cutting Height Adjustment - 40" Mowers

A. Cutting Height Lever

B. Fine Tuning Adjustment

ADJUSTING MOWER CUTTING

HEIGHT - 38", 44", 50", & 54" MOWER

DECKS

The cutting height adjustment knob (B, Figure 8) controls

the mower cutting height. The cutting height is infinitely

adjustable between approximately 1" and 3-5/8" (2,5-

9,2cm). Turn the knob clockwise to raise the deck and

counterclockwise to lower it.

Figure 7. Raising & Lowering Mower - 40" Mowers

A. Mower Lift Lever

B. Mower Height Adjuster

Figure 8. Raising & Lowering Mower

A. Mower Lift Lever

B. Mower Height Adjuster

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 99 100

No comments

White Outdoor LT-1850 Operator's Manual Page 16