White Outdoor LT-1850 Operator's Manual download pdf (Page 69)

OperatingtheTractor

MOWER DECK REMOVAL &

INSTALLATION

Chain Lift Models

WARNING

Engage parking brake, disengage PTO, stop

engine and remove key before attempting to

install or remove the mower.

Muffler and surrounding areas may be hot.

Removing the Mower Deck

1. Park the tractor, fully lower the attachment lift, turn off

the PTO, turn off the engine, remove the key, and

engage the parking brake. If equipped, pivot the

gauge wheels into sliding position (see Figure 13).

2. Place mower in the lowest cutting position using the

mower height control.

3. Use the idler arm (D, Figure 14) to release tension on

the PTO belt, and remove belt from the PTO pulley.

4. Pull down on the lift hooks (A, Figure 14) and unhook

the lift chains (B).

5. Turn the wheels straight ahead. Pull back on spring-

loaded lever (B, Figure 15) and lift mower hitch off of

the tractor brackets (A).

6. Turn wheels fully left, and slide mower deck out from

under the right side of the tractor.

Figure 12. Raising & Lowering Mower

A. Attachment Lift- Manual

B. Attachment Lift- Hydraulic

C. Cutting Height Control

Figure 13. Gauge Wheels - 54" Models Only

Figure 14. Mower Lift

A. Lift Hook

B. Lift Chain

C. PTO Belt

D. Idler Arm

1 2 ... 64 65 66 67 68 69 70 71 72 73 74 ... 99 100

No comments

White Outdoor LT-1850 Operator's Manual Page 69