White Outdoor LT-1850 Operator's Manual download pdf (Page 92)

Troubleshooting,Adjustment,&Service

40" Mower PTO Belt Replacement

1. With the mower deck installed, park the tractor on a

smooth, level surface such as a concrete floor.

Disengage the PTO, engage the parking brake, shut

the engine off, and remove the key.

2. Remove the mower deck (see "Mower deck

removal"). Remove the belt covers.

3. Note the position of the idler pulley belt guides (E &

F, Figure 58) when installed. Loosen the idler pulley

capscrews and remove the belt from the idler pulleys

(D & G).

4. Install the new belt (B) as shown. When the mower

deck is installed on the tractor, the belt wraps around

the PTO clutch pulley (A), backside idler pulley (D),

mower deck drive pulley (C), and v-idler pulley (G).

5. Return the idler pulley belt guides (E & F) to their

original positions and tighten the idler pulley cap-

screws.

Figure 58. PTO Belt Replacement

A. Engine PTO Clutch Pulley

B. PTO Belt

C. Mower Deck Drive Pulley

D. Backside Idler Pulley

E. Belt Guide

F. Belt Guide

G. V-Idler Pulley

1 2 ... 87 88 89 90 91 92 93 94 95 96 97 98 99 100

No comments

White Outdoor LT-1850 Operator's Manual Page 92